-40%
RSW FORGED 4pc 1" 5x5.5 to 5x5 5x139.7 to 5x127 Wheel Adapters With 1/2 Lugs
RSW FORGED 4pc 1" 5x5.5 to 5x5 5x139.7 to 5x127 Wheel Adapters With 1/2 Lugs
RSW FORGED 4pc 1" 5x5.5 to 5x5 5x139.7 to 5x127 Wheel Adapters With 1/2 Lugs
RSW FORGED 4pc 1" 5x5.5 to 5x5 5x139.7 to 5x127 Wheel Adapters With 1/2 Lugs
RSW FORGED 4pc 1" 5x5.5 to 5x5 5x139.7 to 5x127 Wheel Adapters With 1/2 Lugs
RSW FORGED 4pc 1" 5x5.5 to 5x5 5x139.7 to 5x127 Wheel Adapters With 1/2 Lugs
RSW FORGED 4pc 1" 5x5.5 to 5x5 5x139.7 to 5x127 Wheel Adapters With 1/2 Lugs
RSW FORGED 4pc 1" 5x5.5 to 5x5 5x139.7 to 5x127 Wheel Adapters With 1/2 Lugs
RSW FORGED 4pc 1" 5x5.5 to 5x5 5x139.7 to 5x127 Wheel Adapters With 1/2 Lugs
RSW FORGED 4pc 1" 5x5.5 to 5x5 5x139.7 to 5x127 Wheel Adapters With 1/2 Lugs

RSW FORGED 4pc 1" 5x5.5 to 5x5 5x139.7 to 5x127 Wheel Adapters With 1/2 Lugs

$ 57.53

  • Bolt Pattern: 5X139.7 to 5X127 5X5.5" to 5X5"
  • Brand: RSW-RennSpurWerk
  • Center Bore Size: 87.1
  • Finish: Anodized Silver
  • Hub Bore: 87.1
  • Installation Note: Direct Bolt On -Modifying OE Studs Read Description Below
  • Interchange Part Number: Allow Vehicle w/ 5x139.7 Hub to Run 5x127 Wheels
  • Items Included: Wheel Adapters & Nuts
  • Manufacturer: RSW-RennSpurWerk
  • Manufacturer Part Number: WAWU25BU-X2
  • Material: High Grade T6 Aluminum w/ Class 10.9 Carbon steel wheel studs
  • Number in Pack: 4
  • Other Part Number: Allow Vehicle w/ 5x5.5 Hub to Run 5x5 Wheels
  • Performance Part: Yes
  • Placement on Vehicle: Front Axle, Rear Axle
  • Spacer Thickness: 25mm (1.0")
  • Spacer Type: Lug Centric
  • Thread Size: 1/2-20 Lugs
  • Type: Wheel Adapter
  • Vehicle Bolt Pattern:: 5x5.5" (5x139.7)
  • Warranty: 12-Month
  • Wheel Bolt Pattern:: 5x5" (5x127)

Description

Adapter Thickness: 25mm (1 Inch) Each Side Quantity: 4 Pieces [/n] Bolt Pattern: 5x5.5 (Hub) to 5x5 (Wheel) or 5x139.7 (Hub) to 5x127 (Wheel) Center Bore: 87.1mm Thread Pitch: 1/2 Adapter Type: Lug centric Wheel Adapters This adapter set includes open end lug nuts to secure the adapters onto your factory hubs Your Factory wheel studs may extend past the surface of the wheel adapters. In this case you will need to: 1. Trim Factory Studs: Ensure compatibility by shortening existing studs if necessary. 2. Wheel Compatibility Check: Your wheels must feature clearance gaps (cavities) between bolt holes. 3. Upgrade with Shorter Studs: Invest in a set of shorter studs to substitute the factory ones if required.